This line is enough.
BTW, why change it?
↧
Re: DKIM Selector
↧
Re: Weird (?) postfix rewriting of invalid domains on incoming email
I'm afraid that i'm lost, i didn't understand what the issue is 
↧
↧
Re: Reviving Email Problem in Replication
Please check /var/log/maillog (Postfix log) and /var/log/dovecot/*.log (Dovecot).
↧
Re: Cannot see groups in SOgo
Patatedouce wrote:
The query inside the /etc/sogo/sogo.conf is like that:
What's the ldap filter?
↧
Re: Weird (?) postfix rewriting of invalid domains on incoming email
ZhangHuangbin wrote:
I'm afraid that i'm lost, i didn't understand what the issue is
Thanks for looking at this - I don't think I've explained it very well.
I can't see anything odd in my setup and the postfix help files haven't helped me yet. I also haven't been able to replicate my problem using test (i.e. non-client) emails. My client knows that there is some sort of internal domain leakage at their end and are looking at it.
Let's close this question for now and, if I get any insights, I'll share.
Martin
↧
↧
Cannot receive email
==== REQUIRED BASIC INFO OF YOUR IREDMAIL SERVER ====
- iRedMail version: 0.9.9 MYSQL edition.
- Deployed with the downloadable installer.
- Linux/BSD distribution name and version: Ubuntu 16.04 LTS
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Web server (Apache or Nginx): Nginx
- Manage mail accounts with iRedAdmin-Pro?: Nope
====
So basically I setup the server with the installer and the logs don't show any issues. I created a new user and sending mail works fine. However receiving email fails. The /var/log/mail.log shows me the following error:
to=<postmaster@MYDOMAIN.COM>, relay=dovecot, delay=1478, delays=1478/0/0/0.04, dsn=4.3.0, status=deferred (temporary failure. Command output: lda(postmaster@MYDOMAIN.COM,)Error: Error reading configuration: Invalid settings: postmaster_address setting not given lda: Fatal: Internal error occurred. Refer to server log for more information. )
I tried searching the forums and the rest of the internet but I cannot find a working solution. Anyone with tips?
↧
Re: switching to apache2 - what will break?
ZhangHuangbin wrote:
artavec wrote:because nginx will not serve any css to other sites I set up on the server.
This doesn't make any sense, Nginx should work fine in this case. Did you get any error message of this issue?
Bizarrely no error messages, and nothing at all logged that I could find. All css was just silently dropped. I thought the firewall might be blocking it somehow, but that did not make sense as it would go via the same port.
Never mind, I lost patience and transferred all the http activity to another cloud server, which I coincidentally had recently reimaged and set up with nginx. It works fine there, so I will let the two servers remain specialist, one for mail and one for 3w.
It has to be something I misconfigured, but sometimes life is too short to solve all the silly problems...
↧
Re: Reviving Email Problem in Replication
thanks for ur guide mate
here is my logs
would you please check it?
http://www.doctorgorji.com/logs.rar
thanks in advancs
↧
Re: Cannot receive email
Comment out or remove "postmaster_address =" in /etc/dovecot/dovecot.conf, restart Dovecot service and try again.
↧
↧
Re: switching to apache2 - what will break?
artavec wrote:
Bizarrely no error messages, and nothing at all logged that I could find. All css was just silently dropped. I thought the firewall might be blocking it somehow, but that did not make sense as it would go via the same port.
- Does your web browser report "404 not found" error for these CSS files?
- Does Nginx log these "404 not found" error in its log file when you access the website? If no, then probably your firewall or some network device blocks the requests and it doesn't reach Nginx at all. In this case, no matter Apache/Nginx you use, you get same issue.
↧
Re: Reviving Email Problem in Replication
Try to read the log lines one by one by yourself. 
↧
Error In sending mail in wordpress
==== REQUIRED BASIC INFO OF YOUR IREDMAIL SERVER ====
- iRedMail version (check /etc/iredmail-release):
- Deployed with iRedMail Easy or the downloadable installer?
- Linux/BSD distribution name and version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Web server (Apache or Nginx):
- Manage mail accounts with iRedAdmin-Pro?
- [IMPORTANT] Related original log or error message is required if you're experiencing an issue.
====
i have just installed iredmail in fresh ubuntu server. Everything works perfect sending and receiving mail is working perfect.
> But now i need to use that in wordpress smtp setting. I configure smtp setting in wordpress using port 587, TLS and hosname mx.domain.com and when i send mail it says error connect smtp host.
> Can you help i think the server is not using smtp to send mail?
or is there any SSL certificate issue?
↧
Using sieve to filter missmatching header/envelope sender
==== REQUIRED BASIC INFO OF YOUR IREDMAIL SERVER ====
- iRedMail version (check /etc/iredmail-release): 0.9.8 MARIADB edition
- Deployed with iRedMail Easy or the downloadable installer?: downloadable installer
- Linux/BSD distribution name and version: Ubuntu Server 18.04.1 LTS (GNU/Linux 4.15.0-43-generic x86_64)
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MariaDb (unsure)
- Web server (Apache or Nginx): Nginx
- Manage mail accounts with iRedAdmin-Pro?: no
- [IMPORTANT] Related original log or error message is required if you're experiencing an issue.
====
Hi,
i have a question regarding sieve. I want to filter all messages, where the envelope sender and the header sender differ. For this i want to check, whether the header sender contains the mail address of the envelope sender. But my attempts fail. How can i do that sieve?
↧
↧
Re: Cannot receive email
ZhangHuangbin wrote:
Comment out or remove "postmaster_address =" in /etc/dovecot/dovecot.conf, restart Dovecot service and try again.
Thank you for the response ZhangHuangbin. I've seen the same suggestion on the forum before and can assure you that my config does not contain the "postmaster_address = " line.
Do you have any other suggestions? Or could you maby explain why the line is not supposed to be there since the error states it should be?
↧
Re: 0.9.9 Roundcube - 502 Bad Gateway - upstream prematurely closed
Hi
I found the settings you gave us above in www.conf file under /usr/local/etc/php-fpm.d/ directory tree. I applied new settings and started monitoring the server. Until now server running without a problem.
/usr/local/etc/php-fpm.d/www.conf
↧
Re: Support for Exchange 2019
ZhangHuangbin wrote:
selea wrote:/autodiscover/autodiscover.json?Email=username%40domain&Protocol=Autodiscoverv1&RedirectCount=1
Hmm, seems it requests a new URL. Old Outlook versions use "/autodiscover/autodiscover.xml".
Need some time to work it out.
Hi,
Yes it seems like it still uses it? But it is still getting 404 on /autodiscover/autodiscover.xml for some reason.
Anyway, looking forward to your solution!
↧
Re: 0.9.9 Roundcube - 502 Bad Gateway - upstream prematurely closed
Damn the error was so small.
The issue really lies on this line:
listen.allowed_clients = 127.0.0.1, 192.168.8.36IPs can't have space in between, just a coma.
listen.allowed_clients = 127.0.0.1,192.168.8.36So I removed the space after the comma and it is worky worky now.
Thank you all for your help
↧
↧
Re: Problems with configuration in nginx
ZhangHuangbin wrote:
Nginx configured by iRedMail loads files from some directories, you need to make sure your virtual web host config files are loaded by Nginx. Please start with /etc/nginx/nginx.conf, check the "include ..." directives.
Hi, thanks for your response.
This is my conf from /etc/nginx/nginx.conf
user www-data;
worker_processes 1;
pid /var/run/nginx.pid;
events {
worker_connections 1024;
}
http {
include /etc/nginx/conf-enabled/*.conf;
include /etc/nginx/sites-enabled/*.conf;
In the 00-default.conf I have this:
server {
# Listen on ipv4
listen 80;
# Listen on ipv6.
# Note: this setting listens on both ipv4 and ipv6 with Nginx release
# shipped in some Linux/BSD distributions.
#listen [::]:80;
server_name _;
# Redirect all insecure http:// requests to https://
return 301 https://$host$request_uri;
}
In the 00-default-ssl.conf I have this:
server {
listen 443;
server_name _;
root /var/www/html;
index index.php index.html;
include /etc/nginx/templates/misc.tmpl;
include /etc/nginx/templates/ssl.tmpl;
include /etc/nginx/templates/iredadmin.tmpl;
include /etc/nginx/templates/roundcube.tmpl;
include /etc/nginx/templates/sogo.tmpl;
include /etc/nginx/templates/netdata.tmpl;
include /etc/nginx/templates/php-catchall.tmpl;
include /etc/nginx/templates/stub_status.tmpl;
}
Then I have other virtual ones that were working until I installed iredmail, since I install when I call any virutal the webmail of iredmail always speaks to me.
I do not see anything more than this.
Thanks for your answer
↧
Re: Cannot receive email
Okay I managed to fix the first issue. Turn out that my hostname was reverted after a reboot. I now no longer get the error mentioned above.
I'm now at the following error:
mx dovecot: lda(postmaster@MYDOMAIN.COM): Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=2000(vmail) egid=2000(vmail) UNIX perms appear ok (ACL/MAC wrong?), dir owned by 0:0 mode=0755)
EDIT:
I managed to fix the second issue as well.
In the file: /etc/apparmor.d/usr.lib.dovecot.dovecot-lda
I changed the line:
/usr/lib/dovecot/dovecot-lda flags=(complain) {
Into the line:
/usr/lib/dovecot/dovecot-lda flags=(complain,attach_disconnected) {
After that a restart of the apparmor service fixed the issue.
↧
Re: mysql connection changed after reboot
Yes LXC change the hostname after the reboot.
I edited host part in SQL and it is all up and running now, thnx!
↧